 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| usa 215 781 6400 ? ? germany 49 7032 7806 0 ? ? singapore 65 6287 8998 ? ? shanghai 86 21 54643211 / 2 ? ? china 86 755 33966678 ? ? taiwan 886 3 4641811 www.pulseeng.com m120.a (3/07) smt power inductors shielded drum core - pl93xx series ! " " " " mechanical schematic weight . . . . . . . . 2.5 grams tape & reel . . . . . . 400/reel part inductance irated 2 dcr ( m ) inductance saturation 3 heating 4 numbers @irated (a) @0a dc current current ( h typ) typ max ( h) (a) @25c (a) pl9301 0.62 7.60 4.2 5.5 0.6825% 10.00 7.60 pl9302 1.2 7.10 5.6 7.3 1.325% 8.00 7.10 pl9303 1.9 5.80 8.4 10.9 2.225% 6.15 5.80 pl9304 2.8 5.20 10.2 13.3 3.325% 5.80 5.20 pl9305 4.0 4.70 15.1 19.6 4.725% 5.40 4.70 PL9306 5.4 3.70 20.8 27.0 6.025% 4.50 3.70 pl9307 6.9 3.50 23.7 30.8 7.625% 4.00 3.50 pl9308 8.0 3.40 26.5 33.2 1020% 3.80 3.40 pl9309 11 3.00 36.1 45.2 1220% 3.40 3.00 pl9310 12 2.80 39.5 49.4 1520% 3.10 2.80 pl9311 19 2.30 62 77 2220% 2.80 2.30 pl9312 25 2.10 71 89 2720% 2.30 2.10 pl9313 38 1.65 113 142 4720% 2.10 1.65 pl9314 55 1.32 170 212 6820% 1.50 1.32 pl9315 83 1.10 262 328 10020% 1.35 1.10 pl9316 123 0.88 400 500 15020% 1.15 0.88 pl9317 178 0.73 591 739 22020% 0.92 0.73 pl9318 278 0.60 906 1133 33020% 0.70 0.60 * inductance at 0a dc tolerance on indicated part numbers is 30%; tolerance is 20% on all other parts. optional tape & reel packaging can be ordered by adding a " t " suffix to the part number (i.e. pl9301 becomes pl9301 t ). notes from table: (see back page) electrical specifications @ 25c ? operating temperature - 55c to +130c dimensions: inches mm unless otherwise specified, all tolerances are .010 0,25 note: pin 3 and pin 4 are for mechanical connection only. height: 0.157 inches (4.0mm) max footprint: 0.410 inches x 0.410 inches (10.5mm x 10.5mm) max inductance range: 0.62h to 278h current rating: up to 7.6a #$%&'&%' ( ))%% " * * " " " " + + " " , * * ! ! ! notes from tables 1. temperature of the component (ambient plus temperature rise) must be within specified operating temperature range. 2. the rated current as listed is either the saturation current or the heating current depending on which value is lower. 3. the saturation current is the current which causes the inductance to drop to 75% of its initial inductance at zero bias. this current is determined by placing the component at room ambient (25c), and applying a short duration pulse current (to eliminate self-heating effects) to the component. 4. the heating current is the dc current, which causes the temperature of the part to increase by approximately 40c. this current is determined by extending the terminals of the component with 30mm length 28 gauge buss wires and applying the current to the device for 30 minutes. the temperature is measured by placing the thermo- couple between the winding and the shield. 5. in high volt*time applications, additional heating in the component can occur due to core losses in the inductor which may necessitate derating the current in order to limit the temperature rise of the compo- nent. in order to determine the approximate total loss (or temperature rise) for a given application, both copper losses and core losses should be taken into account. smt power inductors shielded drum core - pl93xx series inductance vs current characteristics for more information: pulse worldwide headquarters 2 pearl buck court bristol, pa 19007 u.s.a. www.pulseeng.com tel: 215 781 6400 fax: 215 781 6403 pulse south asia 150 kampong ampat #07-01/02 ka centre singapore 368324 tel: 65 6287 8998 fax: 65 6280 0080 pulse north asia no. 26 kao ching rd. yang mei chen taoyuan hsien taiwan, r. o. c. tel: 886 3 4641811 fax: 886 3 4641911 pulse china headquarters b402, shenzhen tech-innovation international tenth kejinan rd. high-tech industrial park nanshan district, shenzhen china tel: 86 755 33966678 fax: 86 755 33966700 pulse north china room 1503 xinyin building no. 888 yishan rd. shanghai 200233 china tel: 86 21 54643211/2 fax: 86 21 54643210 pulse europe einsteinstrasse 1 d-71083 herrenberg germany tel: 49 7032 7806 0 fax: 49 7032 7806 12 www.pulseeng.com m120.a (3/07) performance warranty of products offered on this data sheet is limited to the parameters specified. data is subject to change w ithout notice. other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. ? copyright, 2007. pulse engineer ing, inc. all rights reserved. |
Price & Availability of PL9306
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |